manualshive.com logo in svg

Fargo Persona M30, User Manual

Share
Download
Fargo Persona M30 User Manual Download Page 5

RESTRICTED USE ONLY

 

 

Fargo Electronics, Inc.

 

Persona M30 Card Printer User Guide (Rev. 1.0) 

v

Using the Image Position radio buttons _______________________________________________ 5-37

 

Reviewing the ISO Track Locations__________________________________________________ 5-38

 

Entering the Track Information _____________________________________________________ 5-39

 

Sending the Track Information ______________________________________________________ 5-39

 

Reviewing Tracks 1, 2 and 3 (in table format) __________________________________________ 5-40

 

Reviewing the Track Data Note _____________________________________________________ 5-40

 

Reviewing the ASCII Code and Character Table ________________________________________ 5-41

 

Using the Overlay / Print Area tab _____________________________________________________ 5-42

 

Enabling the Print Both Sides option _________________________________________________ 5-43

 

Enabling the Print Back Side First option _____________________________________________ 5-44

 

Enabling the Front side option (Overlay / Print Area) ____________________________________ 5-45

 

Enabling the Back side option (Overlay / Print Area) ____________________________________ 5-46

 

Using the Overlay / Print Area dropdown menu ________________________________________ 5-47

 

Using the Overlay / Print Area ______________________________________________________ 5-48

 

Using the Defined Area Option _____________________________________________________ 5-49

 

Using Security Options (Visual Security Solutions) (Frontside option only)___________________ 5-54

 

Selecting Orientation - Landscape ___________________________________________________ 5-55

 

Selecting the Visual Security Solutions dropdown menu (A to D) __________________________ 5-56

 

Selecting Orientation - Portrait ______________________________________________________ 5-57

 

Selecting the Visual Security Solutions dropdown menu (E to H)___________________________ 5-58

 

Selecting the VeriMark radio button (Frontside option only)_______________________________ 5-59

 

Selecting the HoloMark radio button (Frontside option only) ______________________________ 5-60

 

Reviewing the Custom VeriMark Card (Custom Graphic in a 2D foil) _______________________ 5-61

 

Reviewing the Custom HoloMark Card (Custom Graphic in a 2D foil) ______________________ 5-62

 

Using the Printer Information tab ______________________________________________________ 5-63

 

Reviewing the Ribbon Information __________________________________________________ 5-64

 

Reviewing the Ribbon Level Indicator________________________________________________ 5-65

 

Using the Printer Calibration Utility ____________________________________________________ 5-66

 

Using the Image Darkness Option ___________________________________________________ 5-67

 

Using the Print Top of Form Option__________________________________________________ 5-68

 

Using the Print End of Form Option__________________________________________________ 5-69

 

Using the Print Left of Form Option _________________________________________________ 5-70

 

Using the Magnetic Encoder Voltage Offset Option _____________________________________ 5-71

 

Adjusting the Hi-Co Voltage Offset __________________________________________________ 5-72

 

Adjusting the Lo-Co Voltage Offset__________________________________________________ 5-73

 

Using the Mag Top of Form Option __________________________________________________ 5-74

 

Using the Ribbon Tension Option ___________________________________________________ 5-76

 

Using the Flipper Home Offset Option________________________________________________ 5-77

 

Using the Flipper Center Offset Option _______________________________________________ 5-77

 

Section 6: Cleaning ________________________________________________________ 6-1

 

Safety Messages (review carefully)______________________________________________________ 6-1

 

Persona M30 Card Printer/Encoders Cleaning Kit (Part Number 085976) ________________________ 6-2

 

Supplies (included with the Cleaning Kit) ______________________________________________ 6-2

 

Cleaning the Printhead _______________________________________________________________ 6-3

 

Cleaning the Platen and the Card Feed Rollers _____________________________________________ 6-4

 

Cleaning the Printer’s Interior __________________________________________________________ 6-7

 

Cleaning the Printer’s Exterior _________________________________________________________ 6-7

 

Section 7: Packing the Card Printer __________________________________________ 7-1

 

Section 8: Firmware Upgrades _______________________________________________ 8-1

 

Introduction ________________________________________________________________________ 8-1

 

Requirements_______________________________________________________________________ 8-1

 

Safety Messages (review carefully)______________________________________________________ 8-2

 

Downloading Firmware_______________________________________________________________ 8-3

 

Sending the Firmware File ____________________________________________________________ 8-9

 

Summary of Contents for Persona M30






























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands