RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona M30 Card Printer User Guide (Rev. 1.0)
5-31
Using the Magnetic Track Selection radio buttons (continued)
Step Procedure
2 Use
the
Magnetic Track Selections
to configure the way in which each of the
three magnetic tracks will encode.
(
Note No.1:
They do not designate which tracks the Printer will encode (e.g., to
encode only Track 2). This must be done through the specific software program.)
(
Note No.2:
Although the Printer Driver will remember the settings specified for
each of the three tracks, the Printer Driver will always default to displaying the
options for Track 1 whenever the Printer Driver setup screen is first opened.)
