Fargo Persona M30 User Manual Download Page 55

Page: 55 / 221

RESTRICTED USE ONLY

Fargo Electronics, Inc.

Persona M30 Card Printer User Guide (Rev. 1.0)

4-2

Communications Errors

Resolving the Communication Errors

Symptom(s):

Incorrect output, communications error on PC or Printer, stalling, no response

from Printer, no job printed, “paper out” error.

Step Procedure

Confirm that the system meets the minimum requirements, as shown here:

•

IBM-PC

compatible.

•

Windows

2000/XP

Pentium

™

class 233 MHz computer with 64 MB of RAM

or higher

•

200 MB free hard disk space or higher

•

USB

Port

Confirm the correct installation of the Printer Driver.

a. Close the software program and check the Printer Driver.

b. Reboot

the

computer.

c. Ensure the Printer Driver is installed correctly. (

Note:

Especially if an

obsolete Driver was recently removed.)

d. Ensure the correct setup options within the Printer Driver are selected.

e. Confirm that the Driver is current by checking at:

www.fargosupport.com

Summary of Contents for Persona M30






























































































































































































































Search results

Summary of Contents for Persona M30

Reviews:

Brands by name

Popular brands

Fargo Persona M30, User Manual

Search results

Summary of Contents for Persona M30

Reviews:

Brands by name

Popular brands