Fargo HDP600-LC CR100 User Manual Download Page 198

Page: 198 / 432

RESTRICTED USE ONLY

Fargo Electronics, Inc.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)

5-2

Functional Specification - Ethernet Option

The Fargo Ethernet option includes these features.

Feature Description

Simultaneous
Printing

Provides the ability to simultaneously print from multiple PCs to
the network Printer.

Printer Feedback

Provides status information from the network Printer to the PC.

Web Pages

Provides easy Printer configuration with any web browser.

Log Messages

Provides logging of usage and error events via e-mail, UDP or
TCP/IP.

Password Security

Provides security with passwords and configurable User
permission levels.

Telnet

Provides a Telnet command line interpreter for Printer
configuration.

SNMP

Provides an SNMP agent that supports MIB-II.

Upgrades

Provides support for Firmware upgrades over the network.

Troubleshooting

Provides a Ping client for network troubleshooting.

IP Tracer

Provides a utility (IP Tracer) used to find Fargo Printers with
Ethernet connection on a local network. (

Note:

This utility is

included on the CD-ROM and online at

www.fargo.com

Summary of Contents for HDP600-LC CR100

















































































































































































































































































































































































































































Search results

Summary of Contents for HDP600-LC CR100

Reviews:

Related manuals for HDP600-LC CR100

Brands by name

Popular brands

Fargo HDP600-LC CR100, User Manual

Search results

Summary of Contents for HDP600-LC CR100

Reviews:

Related manuals for HDP600-LC CR100

Brands by name

Popular brands