RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
4-60
Resolving a No Ribbon Installed Error
Step Procedure
2
Verify that a Ribbon is installed in the Printer.
a. Press on the
Resume
button.
b. If the issue persist, continue to Step 3.
3
Remove the rear cover and check that the Ribbon RFID cable is securely
connected to the Main Board (J-5) and the RFID Sensor.
•
If the connections are loose, reattach them.
•
Press on the
Resume
button.
•
If the connections are good or if the issue persists, continue to Step 4.
4
Replace the Ribbon RFID Sensor.
