Mi 2466
Polski
English
Mi 2466
Polski
English
- 8 -
3.1 LED DISPLAY
Red LED
When it is continuously ON, the device is booting; when it
is flashing the device tries to register to the GSM network.
If the LED continues to flash the device has a trouble with
the registration or it is broken.
Green LED
It shows the level of GSM signal. 1 flash the signal is weak,
5 flashes the signal is excellent.
3.1 FUNKCJE DIÓD
Dioda czerwona
Jeœli œwieci siê na sta³e, urz¹dzenie uruchamia siê;
jeœli mruga urz¹dzenie próbuje zalogowaæ siê do sieci
GSM. Jeœli dioda nadal mruga urz¹dzenie ma problem z
rejestracj¹ lub jest uszkodzone.
Dioda zielona
Oznacza si³ê sygna³u GSM. 1 mrugniêcie oznacza s³aby
zasiêg, 5 mrugniêæ oznacza najlepszy zasiêg.
Dioda
1
2
3
4
5
Liczba mrugniêæ zielonej diody
Number of flashes of the green LED.
3.2 USUWANIE WSZYSTKICH ZAPROGRAMOWANYCH
DANYCH Z KARTY SIM
Szczególnie zalecane jeœli karta SIM z której zamierzasz korzy-
staæ z modu³em nie jest nowa i s¹ ju¿ zapisane da-
ne w jej ksi¹¿ce telefonicznej.
Po wys³aniu tej wiadomoœci SMS do modu³u wszys-
tkie zaprogramowane parametry i numery s¹ usuwane:
;SDCLR;
Po wys³aniu wiadomoœci SMS nale¿y poczekaæ oko³o
30 sekund a¿ polecenie zostanie wykonane!
Uwaga.
Przez wys³anie tego polecenia wszystkie
zaprogramowane dane s¹ usuwane z karty SIM!
3.2 CLEARING ALL PROGRAMMED DATA FROM SIM
This is highly recommended when a SIM card, you are
going to use for the
, is not new and it already has
some data stored in the phone book memory.
By sending this SMS to
all programmed parameters
and numbers are cleared:
;SDCLR;
After sending SMS you should wait at least 30 second for
the command to be executed!
Note.
By sending this command to the
all
programmed data are erased from the SIM card!
- 29 -
SMS
6.11 SPECJALNE POLECENIA SMS
Te polecenia SMS s¹ u¿ywane do kontroli kilku specjalnych
funkcji urz¹dzenia mycom.
6.11.1 Polecenia ORC1, ORC2
Polecenia u¿ywane do kontroli wyjœæ 1 lub 2 bezpoœrednio
przy pomocy wiadomoœci SMS. Mo¿emy przypisaæ wartoœæ 1
(ORCx=1) do bezpoœredniej aktywacji wyjœcia „x” lub wartoœæ
0 (ORCx=0) do wy³¹czenia wyjœcia „x”.
6.11.2 Polecenie SDCLR
Polecenie SDCLR jest u¿ywane do usuniêcia wszystkich
danych z karty SIM
6.11.3 Polecenie LCRL
Polecenie usuwa wszystkie zdarzenia z pamiêci
6.11.4 Polecenie CLPCLR
Polecenie u¿ywane do usuniêcia wszystkich numerów
CLIP
6.11.5 Polecenie MRES
Polecenie u¿ywane do rêcznego restartu modu³u GSM
6.11.6 Polecenie SSRES
Polecenie u¿ywane do rêcznego restartu modu³u
.
6.11.7 Polecenie EVIN
Parametr u¿ywany do w³¹czenia zapisywania zdarzeæ alar-
mowych z wejœcia 1 lub 2 na liœcie dziennika zdarzeñ.
Tabela 14. Parametry specjalnych poleceñ SMS
Nazwa Opis
ORC1
Bezpoœrednia kontrola wyjœcia 1
ORC2
Bezpoœrednia kontrola wyjœcia 2
SDCLR Usuniêcie ca³ej zawartoœci karty SIM
LCRL
Usuniêcie pamiêci zdarzeñ modu³u
MRES
Rêczny reset modu³u GSM
SSRES Rêczny reset modu³u
Przyk³ad
polecenia SMS
Polecenie Opis
;ORC1=1; W³¹czenie wyjœcia 1
;ORC2=0; Wy³¹czenie wyjœcia 2
;SDCLR;
Usuniêcie wszystkich danych z karty SIM
;LCRL;
Usuniêcie zdarzeñ z modu³u
;MRES;
Rêczny reset modu³u GSM
;SSRES;
Rêczny reset modu³u
SMS
6.11 SPECIAL SMS COMMANDS
These commands can only be sent by SMS messages, and
are used to control some special functions of
device.
6.11.1
ORC1, ORC2 commands
Command is used to control outputs 1 or 2 directly via SMS.
They can assume the value 1 (ORCx=1) to directly activate
output "x" or value 0 (ORCx=0) to deactivate output "x".
6.11.2
SDCLR command
SDCLR command is used to clear all data on SIM card.
6.11.3
LCRL command
Command clears log on
device.
6.11.4
CLPCLR command
Command is used to delete all CLIP numbers.
6.11.5
MRES command
Command is used to manually restart GSM module on
device.
6.11.6
SSRES command
Command is used to manually restart
device.
6.11.7
EVIN command
Parameter is used to enable storing of alarm events from
input 1 or 2 on the LOG list.
Table 14. Parameters of the special SMS commands
Name
Description
ORC1
Direct control of output 1
ORC2
Direct control of output 2
SDCLR Delete all SIM content
LCRL
Delete log on
device
MRES
Manual reset of GSM module
SSRES Manual reset of
device
Example:
SMS commands
CommandDescription
;ORC1=1; Activate output 1
;ORC2=0; Deactivate output 2
;SDCLR;
Clear all data on SIM
;LCRL;
Delete log on
device
;MRES;
Manual reset of GSM module
;SSRES;
Manual reset of
device