- 9
-
Mi 2578
EN
GLISH
FR
ANÇAIS
ES
PAÑOL
P
OR
T
UGUÊS
DE
UTSCH
IT
ALIANO
014
Address associated with short pressure
of button 2.
015
Room number related to the address
associated with short pressure of button
2.
016
Address associated with long pressure
of button 2.
017
Room number related to the address
associated with long pressure of button
2.
---------------------------------------------
018
Address associated with A1/GN input
.
---------------------------------------------
020
Volume level of all ringtones.
---------------------------------------------
021
Ringtone associated to external call.
022
Ringtone associated to intercom call.
023
Ringtone associated to call from another
user.
024
Ringtone associated to floor call (A1/GN
input).
---------------------------------------------
025
Number of rings of the ringtone associ
-
ated with external call.
026
Number of rings of the ringtone associ
-
ated with intercom call.
027
Number of rings of the ringtone associ
-
ated with call from another user.
028
Number of rings of the ringtone associ
-
ated with floor call (A1/GN input).
---------------------------------------------
029
Automatic answering.
---------------------------------------------
Programming procedure
To carry out the programming, you need to:
Enter the programming mode
as described
in the "Enter Programming Mode" section;
identify the programming code to use
(see
table 2);
enter the three digits of the programming
code you intend to use
following the
instructions in the "entering codes and
values" section;
press
to confirm
: you will hear a
tone, the
symbol
will start flashing very
quickly, notifying the operator that the device
is awaiting the value;
enter the new value
, following the
instructions in the "Entering Codes and
Values" section;
press
to confirm
: you will hear a tone,
the
symbol lights up for a moment and
t h e
symbol
will stop flashing quickly
and will return to flash as before entering
the code, notifying the operator that the
device is awaiting a new programming code;
continue
by entering the code of another
programming or exit, following the
instructions in the "Exit Programming Mode"
section.
Programming additional user addresses
(codes 001-004).
In DUO systems, the intercom can also answer
calls addressed to other users, so 4 additional
call addresses can be stored. The storage pro-
cedure is shown below for the first of the four
addresses (code 001). Using codes 002, 003 and
004, the second, third and fourth additional
addresses can be entered respectively.
First additional address (code 001).
To program the first additional call address (by
default empty; permitted addresses between
Exit programming mode
To exit programming, you need to:
press and release the key
;
the
symbol turns off.
Attention:
If no operations are carried
out for more than 60 seconds, the
intercom exits the programming mode
automatically.
Entering codes and values
To enter codes and values, use the keys
1, 2
and
;
their use is as follows:
:
Press this button
to confirm the
entering of a code
or
to switch to next
programming phase
.
2
:
Press this button
to increase the value
of the digit to be entered
. Press the
button a number of times equal to the
digit to be entered (digit 1=1 press, digit
9=9 presses, digit 0=10 presses of the
button).
1
:
Press this button
to confirm the digit
entry and move on to the next entry
.
Press the button to move from hundreds
to tens, from tens to units and to confirm
the entry of units.
Each button pressing is confirmed by a tone.
Notes on entering codes and values
-
The codes and values to be entered must be
always composed by three digits (hundreds,
tens, and units); codes and values that are
composed of tens and units or units alone
must be completed by adding zeros. For
example, number 96 becomes 096 and
number 5 becomes 005.
-
The digits must be entered one by one by
pressing button "2" as many times as the
value to be entered, followed by pressing
button "1" to move on to the next digit (a tone
will indicate when to move on to the next
digit). For example, to enter number 096 you
need to:
-
press the "
2
" button
10 times
to enter the
digit 0 and then
press the "
1
" button;
-
press the "
2
" button
9 times
to enter digit
9 and then
press the "
1
" button;
-
press the "
2
" button
6 times
to enter the
digit 6 and then
press the "
1
" button.
Table 2
Programming codes
---------------------------------------------
001
First additional address.
002
Second additional address.
003
Third additional address.
004
Fourth additional address.
---------------------------------------------
005
Room number related to the user address
set with the dip-switches.
---------------------------------------------
006
First additional address room number.
007
Second additional address room number.
008
Third additional address room number.
009
Fourth additional address room number.
---------------------------------------------
010
Address associated with short pressure
of button 1.
011
Room number related to the address as-
sociated with short pressure of button 1.
012
Address associated with long pressure
of button 1.
013
Room number related to the address
associated with long pressure of button
1.
EN
PROGRAMMING
Factory settings
The following are the values of the default fac-
tory settings, if you need to change them follow
the instructions in the following paragraphs.
-
User Address
=100
(via dip-switch)
-
Room Number
=000
-
User additional addresses (1-4)
=empty
-
Room numbers for additional addresses
(1-4)
=empty
-
Address associated with short pressure on
Button 1
=211
-
Address associated with long pressure on
Button 1
=empty
-
Address associated with short pressure on
Button 2
=empty
-
Address associated with long pressure on
Button 2
=empty
-
Address associated with A1/GN input
=empty
-
Volume level of all ringtones
=3
-
Call tones and number of rings
=table1
-
Muting of all ringtones
=disabled
-
Automatic answering
=disabled
-
Talk volume level with external stations
=5
-
Talk volume level with internal stations
=3
Programming user address
The user address (factory default 100, al-
lowed values from 001 to 200) is set via the
dip-switches under the intercom cover. See
table 3. All other parameters must be stored
in the intercom, following one of the following
procedures.
Programming via Bluetooth
It is recommended to program the device via
Bluetooth by downloading the
"DUO System"
app (available for iOS and Android) in your
smartphone or tablet. This requires:
connect a PGR2991BT or XE2921 Bluetooth
programmer to the system;
launch the DUO System app, go to the Bus
DUO section, press the "+" button and enter the
intercom address as set on the dip-switches;
program and disconnect.
If a Bluetooth programmer cannot be
used, an "emergency" programming
procedure is available, described in the
following paragraphs.
Entering programming mode
Programming is only possible when the inter-
com is in standby mode. To enter programming
mode:
simultaneously hold pressed buttons
1
and
2
, ignoring the beeps played (2 in the case
of ringtones enabled and 1 with ringtones
excluded) until the
symbol LED starts
flashing.
Table 1.
Factory settings for ringtones
Number Type of
Calls
of rings melody
from door station 1
Din-Don
intercommunicating 4
Dring 1
from other users
4
Dring 2
floor (local)
1
Dring 3
