![background image](http://html1.mh-extra.com/html/farfisa/alba-ab3g/alba-ab3g_get-started_3426487012.webp)
- 12 -
Mi 2546
Italiano
English
3.2 CLEARING ALL PROGRAMMED DATA FROM SIM
This is highly recommended when a SIM card, you are going
to use for the AB3G module is not new and it already has
some data stored in the phone book memory.
By sending this SMS to the AB3G module all programmed
parameters and numbers are cleared:
;SDCLR
Attention
.
By sending this command all programmed
data are erased from the SIM card and from the device
memory. After sending the SMS you should wait at least 30
second for the command to be executed. After the procedure
is completed the device booths again automatically.
1
4
7
2
5
8
0
3
6
9
#
drin
1
1
1
4
4
4
7
7
7
2
2
2
5
5
5
8
8
8
0
0
0
3
3
3
6
6
6
9
9
9
#
#
#
11
click
4 OPERATION
By pressing a button on the push-button module, the device
calls
automatically the first user stored in the KPA parameter
of the selected group
(paragraph 6.8.1)
. If the called user
doesn’t answer within the time set by the KPT parameter
(paragraph 6.8.2)
the AB3G module ends automatically the
call and, if other telephone numbers are stored in the KPB
or KPC parameters, calls them in sequence. Before a voice
communication has been activated, pressing an another button
the running call is ended and the device calls automatically the
user stored under the last pressed button. A voice conversation
is ended when expires the conversation time stored in the
LOT parameter
(paragraph 6.2.2.3)
, when the called user
closes the conversation or pressing any button on the AB3G
module. During the conversation it would be possible to release
the electrical door lock dialling on the phone a 2 digit code
according to the table 5.
Example:
if the electrical door lock is connected to the output
1 press, within 2 seconds, twice the key 1 (number 11).
3.1 CANCELLARE TUTTI I DATI PROGRAMMATI NELLA
SCHEDA SIM
Questa operazione è necessaria, se la scheda SIM che si
intende utilizzare per l’unità AB3G non è nuova e ha già alcuni
dati memorizzati.
Inviando questo SMS al modulo AB3G tutti i parametri e
numeri programmati saranno cancellati:
;SDCLR;
Attenzione.
Con l’invio del comando precedente tutti i
dati programmati saranno cancellati dalla scheda SIM e dalla
memoria del dispositivo. Dopo l’invio dell’SMS è necessario
attendere almeno 30 secondi affinché il dispositivo completi
le cancellazioni. A cancellazione avvenuta il dispositivo si
riavvia automaticamente.
4 FUNZIONAMENTO
Pre
mendo un pulsante di chiamata sulla pulsantiera, si effet
-
tua la chiamata al primo numero di telefono memorizzato nel
parametro KPA del pulsante selezionato
(paragrafo 6.8.1)
.
Se l'utente chiamato non risponde entro il tempo stabilito
nel parametro KPT
(paragrafo 6.8.2)
, AB3G interrompe la
chiamata e, se sono presenti altri numeri telefonici nei pa-
rametri KPB e KPC, effettuano in sequenza le chiamate agli
altri due numeri telefonici. Se non è stata ancora attivata una
comunicazione telefonica, premendo un altro pulsante sulla
pulsantiera, si interrompe la chiamata in corso e si passa a
chiamare l'utente memorizzato nell'ultimo pulsante premuto.
Una comunicazione in corso si interrompe quando termina
il tempo impostato nel parametro LOT
(paragrafo 6.2.2.3)
,
quando l'utente chiamato chiude la conversazione o pre
-
mendo un qualunque pulsante sulla pulsantiera. Durante la
comunicazione telefonica è possibile azionare la serratura
dell'ingresso, componendo sul telefono un numero a 2 cifre
secondo la tabella 5.
Esempio:
se la serratura è collegata all'uscita 1, premere
(entro 2 secondi) due volte la cifra 1 (numero 11).