manualshive.com logo in svg

Farallon Netopia 412, User Manual, Page: 127 / 162

Share
Download
Farallon Netopia 412 User Manual Download Page 127

Modem Operation

A-17

ISDN modem result codes

The following table lists the Netopia ISDN Modem result codes.

#

Verbose

Meaning

0

OK

The most recent command or action was 
successfully completed.

2

RING

An incoming call is present and no AT 
Answer command is outstanding.

3

NO CARRIER

The most recent call attempts did not 
establish a call or the physical ISDN 
inter face is not operational.

4

ERROR

The most recent command or action was 
not successfully completed.

7

BUSY

The most recent call attempt did not 
connect because the remote destination 
was busy.

8

NO ANSWER

Indicates the location you are calling is not 
responding.

5

CONNECT 

1200

The serial por t connection is 1200 bps.

10

CONNECT 

2400

The serial por t connection is 2400 bps.

11

CONNECT 

4800

The serial por t connection is 4800 bps.

12

CONNECT 

9600

The serial por t connection is 9600 bps.

13

CONNECT 

7200

The serial por t connection is 7200 bps.

Summary of Contents for Netopia 412



































































































































































Reviews:

No comments