background image

Modem Operation

A-11

S registers

The Netopia ISDN Modem suppor ts the S registers listed in the 
following table. All S registers except S register 0 are the Netopia 
ISDN Modem’s extended registers.

An asterisk next to an S register indicates the S register value is 
stored in non-volatile memor y and is not cleared or returned to the 
default value if the Netopia ISDN Modem is powered down.

To define an S register value, use the following format: ATS?=XX, ? 
represents the S register and XX is the desired S register setting. 

\T

Link inactivity timer
\T0

disables inactivity timer (default).

\Tn

link inactivity timer in minutes. The ISDN 
modem automatically disconnects the call if 
no activity is sensed within 

n (n = 1–255)

 

minutes. 

V

Result code format
V0

enables shor t form result codes.

V1

enables long form result codes (default).

&W

Stores the configuration of all S registers that are 
not par t of the ISDN modem’s initial configuration 
set.

Z

Reset. Disconnects all calls in progress and 
per forms a complete ISDN modem system reset.

+++

Causes ISDN modem to enter the command state 
if it is currently in the online state.

%V

Displays Netopia ISDN Modem firmware version.

Command

Description 

Summary of Contents for Netopia 412



































































































































































Reviews: