manualshive.com logo in svg

Farallon Netopia 412, User Manual, Page: 103 / 162

Share
Download
Farallon Netopia 412 User Manual Download Page 103

Troubleshooting

7-3

B2

Yellow
 or 
green

B-2 Channel Indicator

. The activity state of the B-2 channel. Green indicates 

a data call. Yellow indicates an analog (voice) call. 

■

If a call is in a dialing state, the LED flashes. 

■

When a call is active, the LED stays lit. (The color of the LED (green or 
yellow) indicates if the call is a data call or an analog call.)

■

When the call is disconnected, the LED goes off.

Send

Green

Send Data

. Indicates that information is being transmitted over the serial 

data por t from the computer to the ISDN modem. 

Receive

Green

Receive Data

. Indicates that information is being transmitted over the serial 

data por t to the computer from the ISDN modem. 

Ready

Green

Data Terminal Ready

. Indicates that communication between the ISDN 

modem and the computer has been established. 

LED

Color

Description

Summary of Contents for Netopia 412



































































































































































Reviews:

No comments