manualshive.com logo in svg

Farallon Netopia 412, User Manual, Page: 119 / 162

Share
Download
Farallon Netopia 412 User Manual Download Page 119

Modem Operation

A-9

%C

Compression. When enabled, compresses data to 
improve data transfer times using the Stac 
compression method. The following check modes 
are available–None, One Byte Sequence Number, 
Extended. Extended is the preferred method.
%C0 disables compression.
%C2 enables compression.

&C

Serial por t CD control
&C0 forces CD to remain on at all times.
&C1 forces CD to follow the state of carrier from 

the remote system. CD turns on after 
CONNECT message is sent to host (default).

&C2 forces CD to remain on except temporarily 

after disconnect.

D

Dials an outgoing 56/64 Kbps circuit-switched 
digital connection.

DD

Dials an outgoing Toll Saver (56 Kbps permissive) 
connection.

&D

DTR control 
&D0 causes ISDN modem to ignore DTR from 

host.

&D1 causes ISDN modem to enter command 

state on detecting on-off transition of DTR.

&D2 causes ISDN modem to hang up current 

calls upon on-off transition of DTR and 
prepares serial por t to accept AT command 
at any speed (default).

E

AT command echo
E0

disables the echo of AT commands back to 
the host computer.

E1

enables the echo of AT commands to the 
host computer (default).

Command

Description 

Summary of Contents for Netopia 412



































































































































































Reviews:

No comments