Faraday 8720, User Manual

Page: 32 / 36

DEVICE PROGRAMMING UNIT USER’S MANUAL
| CHAPTER 4
28
PRINTING LABELS
3. Use the INC # and DEC # buttons to set the
number of copies desired. Press EXIT to return to
the Main Menu display.
Bulk Printing
From one to nine copies of each label may be printed for
a range of addresses by using the bulk print facility.
Following is the procedure:
1. Connect the 8720 to the optional printer with
programming cable P/N 555-134217. (Refer to Figure
1, page 2, for the location of the printer port.)
2. With the 8720 displaying the Main Menu, press
SETUP then PRINTER then BULK. The 8720 will
display a screen similar to the following:
3. Use the left and right buttons to move the cursor
over the various numerical fields to set the starting
address (S’ADD), the ending address (E’ADD), the
loop number (LOOP) and the number of copies
(COPIES) of the label—from 1 to 9—that you wish
to print.
4. When these have been set correctly press the
PRINT button. The 8720 will then begin printing the
labels and the display will indicate that printing is in
progress.
5. An ABORT button is provided to allow the user to
cancel the printing operation and return to the bulk
printing display.
6. The display will indicate when the printing has been
completed.
7. To return to the bulk printing screen to print another
batch of labels, use the EXIT button.
S’ADD=123 E’ADD=123
LOOP=1 COPIES=2
<LEFT RIGHT>
<EXIT PRINT>
firealarmresources.com