Faraday 8720, User Manual

Page: 28 / 36

DEVICE PROGRAMMING UNIT USER’S MANUAL
| CHAPTER 3
24
TESTING
6000/7000
At the Main Menu press TEST then press MANUAL. The
8720 will prompt for a device to be connected or a
detector to be inserted. (Refer to Figure 2, pages 10-11,
to install devices for testing.) When the device or
detector is found, the display will show the type of device
that has been found, the device address and the current
status of the device as shown in the screen below. The
manual test screen is updated once per second.
8713
ADDRESS=002
NORMAL
<EXIT NEXT>
8713 Example
Pressing EXIT will return the 8720 to the device test
screen. Pressing NEXT will display further screens of
information that will vary depending on the type of
device being tested. Some example screens are shown
below:
S/N=94D1F724
USAGE=ALARM
ASD=OFFICE
<EXIT NEXT>
8713 Example
IEC=CLEAN
TEMP=23C/74F
SENS=3.14%/FT
<EXIT NEXT>
8713 Example
S/N=04080036
USAGE1=TROUBLE, N/C
USAGE2=ALARM, N/O
<EXIT NEXT>
8703 Example
firealarmresources.com