Faraday 8720, User Manual

Page: 17 / 36

CHAPTER 2 |
DEVICE PROGRAMMING UNIT USER’S MANUAL
PROGRAMMING
13
Smoke Detectors
• To program a 1000/1500 smoke detector, the
system must be set to 1000/1500 (See page 6).
Begin with the 8720 displaying the Main Menu and
then press the PROGRAM button. The 8720 will
prompt the user to insert or connect a device or
detector. When the 8720 finds the detector, it will
display the detector type on the first line of the
display. The 8720 will display a screen similar to the
following:
8810
LOOP=1 ADDRESS=41
<LOOP ADDRESS>
<EXIT PROGRAM>
Press the LOOP or ADDRESS button to move the
cursor over the loop or address number, and then
use the keypad to set the appropriate number.
The loop number will only appear if the 8720 has been
configured for label printing.
The maximum loop setting displayed is 4. If any number
greater than 4 is entered, “incorrect entry” will be displayed.
• If the loop and address information is correct, press
PROGRAM. The 8720 will indicate that it is pro-
gramming the unit and when programming is
complete, will display a screen similar to the
following:
8810
LOOP=1 ADDRESS=41
PROGRAMMED OK
<EXIT CHANGE>
Press EXIT to return to the Main Menu. Press
CHANGE to return to the beginning and change the
settings.
firealarmresources.com