Far Tools 118005, Manual

Page: 34 / 104

EN
FUEL TAP
1- Shut down the motor
2- Remove the plate
3- Turn the supply cock lever to «OFF».
4- Remove the tray from the fuel cock and the seal
5- Clean the tray using a solvent and dry it
6- Check the seal and replace it if it is damaged
7- Reassemble the seal, tray and plate.
FUEL TANK FILTER
1- Remove the fuel cap tank and filter.
2- Clean the filter with solvent. If damaged, replace.
3- Wipe filter and insert it.
Do not wring out the element. This could cause it to lear. The engine should
never run without the element; excessive piston and cylinder wear may result.
Never use solvent while smoking or in the vicinity of an open flame.
!
Never use or be near the fuel and solvent while smoking or in the vicinity of an
open flame. be sure the fuel cock cup is tightened securely.
!
be sure the fuel cock cap is tightened securely.
!
© FAR GROUP EUROPE
groupe electrogène 118005.indd 34 20/02/06 16:16:27