W611W User Manual
20 / 141
5.2 Replacement battery
1. Removing the rear case: Remove the rear case of the whole machine with A
。
little force from the handle
position of the rear case of the main unit.
2. Removing the battery cover :From the back of the main unit, buckle the hand position B, and pull it
upwards in the direction indicated by the arrow at the same time (depending on the strength of different users,
it may be removed after two or three times of pulling; in order to ensure the waterproof level of the machine , it
is not easy to disassemble here).
3. Remove the battery: Pull the battery button down to remove the old battery.
4. Install the battery: Take out the battery from the packaging box, with the battery with the notch facing up,
put the battery C at the battery compartment C, and pull the battery button until it completely fits the
underside of the battery.
5. Install the battery cover: Take out the battery cover from the packaging box, and press the battery cover
firmly along the edge of the battery compartment to ensure that the outer surface of the battery cover is
completely inserted into the battery compartment and flush with the edge of the battery compartment,
reaching IP67 waterproof level.
6. Install the back cover:Align the back cover with the buckle on the back of the main unit, press your hands
along the edge of the main unit from top to bottom (there will be a "click" sound during the process), and
ensure that there is no gap, it means that the back cover is fastened.
Removing the rear case
Removing the battery cover
Remove the
battery
