W611W User Manual
44 / 141
User can press up/down navigator buttons to switch screen page, and switch call focus by pressing
[
Select
] >> [
Resume
] button.
Ending One Call
User may hang up the current talking call by closing the audio channel or press [
End
] button. The device
will return to single call mode in holding state. Users can also resume the current call by pressing the [
Select
]
>> [
Resume
] key.
8.3 End of the Call
After the user finishes the call, the user can put the handle back on the phone, press the hands-free
button or Softkey [End] key to close the voice channel and end the call.
Note! When the phone is in the reserved state, the user must press the [Resume] key to return to the
call state, or put the receiver back and press the hands-free button to end the call.
8.4 Redial
W611W has no physical redial key, users can set the side function key as redial key when using. Setting
method: In standby, press [
Menu
] >> [
Settings
] >> [
Keyboard]
>> [
DSS Key Settings
], select the function
key to be set, select the type of function key for the type, and select Redial for the name of the function key.
You can set the name of the callback key in the name input box, and press the [
OK
] button to save.
Picture 26 - Set redial DSS key
Redial the last outgoing number:
When the phone is in standby mode, press the redial button and the phone will call out the last outgoing
number.
Call out any number with the redial key:
Enter the number, press the redial key, and the phone will call out the number on the dial.
