Fanvil H3W, Administration And User Manual

Page: 48 / 80

49

IPv6
In IPv6, there are 2 connection mode options, DHCP and Static IP.

DHCP configuration refers to IPv4 introduction in last page.

Static IP configuration is almost same as IPv4’s, except the IPv6 Prefix.

IPv6 Prefix: IPv6 prefix, it is similar with mask of IPv4.
11.3 Network >> Service Port
This page provides settings for Web page login protocol, protocol port settings and RTP port.
Picture 33 - Service Port Settings
Table 8 - Service port
Parameter Description
Web Server Type
Reboot to take effect after settings. Optionally, the web page login is
HTTP/HTTPS.
Web Logon Timeout
Default as 15 minutes, the timeout will automatically exit the login page,
need to login again.
Web auto login
After the timeout does not need to enter a user name password, will
automatically login to the web page.
HTTP Port
The default is 80. If you want system security, you can set ports other than
80.
Such as :8080, webpage login: HTTP://ip:8080
HTTPS Port The default is 443, the same as the HTTP port.
RTP Port Range Start
The value range is 1025 to 65535. The value of RTP port starts from the
initial value set. For each call, the value of voice and video port is added 2.
RTP Port Quantity Number of calls.