Fanvil H3W Administration And User Manual Download Page 35

Page: 35 / 80

Picture 24 - Web call waiting tone setting

8.9 Anonymous Call

8.9.1

Anonymous Call

The phone can set up anonymous calls to hide the calling number and the calling name.



On the web page [

Line

] >> [

SIP

] >> [

Advanced Settings

] can also open the mode of anonymous calls.



Setting to enable anonymous calls also corresponds to the SIP line. That is, the setting under the SIP1
page can only take effect on the SIP1 line.

Picture 25 - Enable Anonymous web page call

8.9.2

Ban Anonymous Call

The device can be set to prohibit anonymous calls, that is anonymous calls to the number will be directly
rejected.



On the web page [

Line

] >> [

SIP

] >> [

Advanced Settings

], also can disable anonymous calls.



The setup to disable anonymous calls also corresponds to the SIP line. That is, the setting under the
SIP1 page can only take effect on the SIP1 line.

Picture 26 - Page Settings blocking anonymous call

Summary of Contents for H3W

















































































Search results

Summary of Contents for H3W

Reviews:

Related manuals for H3W

Brands by name

Popular brands

Fanvil H3W, Administration And User Manual

Search results

Summary of Contents for H3W

Reviews:

Related manuals for H3W

Brands by name

Popular brands