Configuring
3-62
The password option allows user to set or clear the raid subsystem’s pass-
word protection feature. Once the password has been set, the user can only
monitor and configure the raid subsystem by providing the correct password.
The password is used to protect the internal RAID subsystem from unautho-
rized entry. The controller will check the password only when entering the
Main menu from the initial screen. The RAID subsystem will automatically go
back to the initial screen when it does not receive any command in ten
seconds.
To disable the password, press
Enter
key only in both the
Enter New Password
and
Re-Enter New Password
column. Once the user confirms the operation
and clicks the
Submit
button. The existing password will be cleared. No pass-
word checking will occur when entering the main menu from the starting screen.
3.9.11 Upgrade Firmware
Please reference the section 4.2 for more information.
3.9.12 Restart Controller
Summary of Contents for MGD-16FC16S
