Fantom Drives MGD-16FC16S Installation Reference Manual Download

Page: 66 / 115

Configuring

3-30

Volume Name:

The default volume name will always appear as Volume ---VOL#. You can
rename the volume set name providing it does not exceed the 15 characters
limit.

Raid Level:

Set the RAID level for the Volume Set. Highlight

Raid Level

and press

Enter

The available RAID levels for the current Volume Set are displayed. Select a
RAID level and press

Enter

to confirm.

Capacity:

The maximum volume size is default in the first setting. Enter the appropriate
volume size to fit your application.

Greater Two TB Volume Support:

If volume size over 2TB, it will be pro-

vided one option “Creater TwoTB Volume Support” Automatically.

No: still keep the volume size with max. 2TB limitation.

Summary of Contents for MGD-16FC16S




















































































































Search results

Summary of Contents for MGD-16FC16S

Reviews:

Related manuals for MGD-16FC16S

Brands by name

Popular brands

Fantom Drives MGD-16FC16S, Installation Reference Manual

Search results

Summary of Contents for MGD-16FC16S

Reviews:

Related manuals for MGD-16FC16S

Brands by name

Popular brands