Configuring
3-56
3.9.5 SNMP Configuration
The SNMP gives users independence from the proprietary network management
schemes of some manufacturers and SNMP is supported by many WAN and LAN
manufacturers enabling true LAN/ WAN management integration.
To set the SNMP function, move the cursor bar to the main menu and click on
he
SNMP
Configuration
. The Raid System SNMP Function menu will show
all items. Select the desired function.
SNMP Trap Configurations:
Type the SNMP Trap IP Address. The Port de-
fault is 162.
SNMP System Configuration:
Community: The default is Public.
(1)sysContact.0; (2)sysLocation.0; (3)sysName.0: SNMP parameter (31 bytes
max). If this 3 categories are selected during initial setting then when an error
occurs SNMP will send out a message that includes the 3 categories within
Summary of Contents for MGD-16FC16S
