Configuring
3-58
3.9.6 NTP Configuration
NTP stands for
Network Time Protocol
, and it is an
Internet
protocol used to
synchronize the clocks of computers to some time reference. NTP is an
Internet
standard protocol. You can directly type your NTP Server IP Address
to have the RAID subsystem can work with it.
To set the NTP function, move the cursor bar to the main menu and click on
he
NTP
Configuration
. The Raid System NTP Function menu will show all
items. Select the desired function.
Key in NTP server IP , select Time Zone , get NTP time. Setting Automatic
Daylight Saving by the region. “NTP Time Got At” is NTP got last time.
After you complete the addition, tick on the
Confirm The Operation
and click
on the
Submit
button
to complete the action.
Summary of Contents for MGD-16FC16S
