3. Adjustments
USE AND MAINTENANCE MANUAL
CHAPTER 3
ADJUSTMENTS
2-Strokes - Edition 01 / 2023
86
1
4
4
3
2
A
5
6
3.5 HANDLEBAR ADJUSTMENT
Handlebar installation and adjustment
Install handlebar “1” on lower supports “2”;
Install upper supports “3” and fastening bolts “4”, without
tightening them definitively.
Install the lower handlebar mounts so that the
side with the longest distance “A” faces forward. By
installing them in the opposite direction, it is possible
to change the front/rear off-set of the handlebar
position.
By installing the lower mounts in the opposite
direction, the amount of front-rear offset of the
handlebar position can be changed.
Lower handlebar support nut:
40 Nm (4.0 m•kg, 30 ft•lb)
First tighten the bolts on the front side “5” of the upper
handlebar holder, and then tighten the bolts “6” on the rear
side.
Always install the upper handlebar mounts with
the punching facing the front and the side reference
notch towards the centre nut of the steering plate.
Upper handlebar support bolt:
28 Nm (2.8 m•kg, 20 ft•lb)
