13 Motore
1. General information
USE AND MAINTENANCE MANUAL
CHAPTER 1
GENERAL INFORMATION
4-Strokes - Edition 00 / 2022
66
Maintenance intervals for competition use (XEF 250 / XEF 450 versions)
The following schedule is intended as a general guide to maintenance and lubrication. Bear in mind that such factors
as weather, terrain, geographical location, and individual usage will alter the required maintenance and lubrication
intervals. If you are a doubt as to what intervals to follow in maintaining and lubricating your machine, consult your
FANTIC dealer.
Periodic inspection is essential in making full use of the machine performance. The service life of the parts varies
substantially according to the environment in which the machine runs (e.g., rain, dirt, etc.). Therefore, earlier inspection
is required by reference to the list below.
Items marked with an asterisk (*) should be performed by a FANTIC dealer as they require special tools, data and technical
skills.
No.
Item
Checks and maintenance jobs
After break-in
Every race
Every third
race (or 500
km)
Every fifth
race (or 1000
km)
As required
1
Engine oil
– Replace.
√
√
2
*
Valve
– Check the valve clearances.
√
√
– Check the valve seats and the
valve stems for wear.
√
– Replace.
√
3
*
Valve spring
– Check the free length.
√
– Replace.
√
4
*
Valve lifter
– Check for scratches and wear.
√
– Replace.
√
5
*
Camshaft
– Inspect the camshaft surface.
– Inspect the decompression sys-
tem.
√
– Replace.
√
6
*
Camshaft sprocket
– Check for wear on the teeth and
for damage.
√
– Replace.
√
7
*
Piston
– Inspect crack.
– Inspect carbon deposits and
eliminate them.
√
√
– Clean.
√
– Replace. (It is recommended that
the piston pin and ring are also
replaced at the same time.)
√
8
*
Piston ring
– Check the ring end gap.
√
– Replace.
√
√
9
*
Piston pin
– Inspect.
√
– Replace.
√
10
*
Cylinder head
– Inspect carbon deposits and
eliminate them.
– Change gasket.
√
11
*
Cylinder
– Inspect score marks.
– Inspect wear.
√
– Replace.
√
12
*
Clutch
– Inspect housing, friction plate,
clutch plate and spring.
√
√
– Replace.
√
13
*
Transmission
– Inspect.
√
– Replace bearings.
√
14
*
Shift fork, shift cam,
guide bar
– Inspect wear.
√
