Fantic Motor TL 250, Workshop Manual

Page: 31 / 138

31
WORKSHOP MANUAL
TL 250
CHAPTER 7
AIR FILTER
REMOVAL
!
S
GN
U
T
WORKSHOP MANUAL
TL 250
To get to the filter, you will need to:
- Remove the seat, see section 5.1.
- Free the battery box by unscrewing the 4 screws S shown in the photo.
Lift the battery box T, moving it to the side as illustrated in figure 3.
NB: clean the inside of the airbox with a cloth before pulling out the filter to stop
dust and foreign objects entering the intake.
- Unscrew and remove the screw (U).
- Pull out the filter (V)
WARNING: THIS TYPE OF FILTER IS NOT DESIGNED TO BE CLEANED: IT IS MEANT TO BE REPLACED EVERY
5000 KM (1250 MI) FOR ROAD USE, AND AT LEAST EVERY 1000 KM FOR OFF-ROAD USE.
Replace the filter (V) with a new one of the same type.
WARNING: After each job, check that you have not left anything inside the airbox.