131
!
131
CHAPTER 19
MAINTENANCE
CHART
WORKSHOP MANUAL
TL 250
!
Unless you have all the specific tools, clothing and suitable protective equipment, and a suitable place to perform work
safely, you are advised to refrain from performing maintenance. If you require technical advice or assistance from customer
support, please contact an Authorized Fantic Motor Centre.
!
!
!
!
!
Fantic Motor disclaims all civil or criminal liability for damage to the vehicle or property, and/or injury to persons, as a result
of maintenance work carried out by the user.
If users are not interested in carrying out certain routine maintenance procedures themselves, they are advised to contact
an Authorized Fantic Motor Centre.
Perform maintenance work at shorter intervals if the vehicle is used in rainy or dusty areas, on uneven ground, or for racing.
Inspect and check the engine oil level every 1,000 km (600 mi).
The vehicle must go in for its first service within its first year of use, even if it has not completed the stated 1,000 km (600 mi).
The vehicle must go in for a further checkup within its second year of use, even if it has not completed the stated mileage.
The vehicle will not be covered under warranty unless it is serviced as prescribed (first service in the first year and second in
the second year).
The vehicle must go in for regular annual checkups unless it reaches a stated service distance (in kilometres or miles) earlier.
19.1 INJECTION MAINTENANCE CHART
Position
Work
1,000 km
(600 mi)
5,000 km
(3,000 mi)
10,000 km
(6,000 mi)
15,000 km
(9,000 mi)
20,000 km
(12,000 mi)
Fuel system
– Check petrol hoses for cracking or damage.
Spark plug
Check condition.
– Clean and restore electrode gap.
– Replace.
Valves
– Check valve clearance.
– Adjust.
Air filter
– Clean.
– Replace.
Clutch
– Check operation.
– Adjust.
Front brake
Check operation, fluid level, and inspect
vehicle for leaks.
Replace brake pads.
If worn down to limit value.
Rear brake
– Check operation, fluid level, and inspect
vehicle for leaks.
– Replace brake pads.
If worn down to limit value.
Summary of Contents for TL 250
