12.
Flash Pop-Up
– Turning this control counterclockwise will pop
Note that once the camera built
/ Right
control
(no. 15) and selecting “flash disabled” on the f
Up control clockwise will not have any effect on the built
Note
: When shooting in M (Manual),
modes, please take into consideration that once the
disabled. Therefore, in such cases, it's recommended to switch to Auto shooting mode to eliminate
the flash after it has been popped up.
13.
Movie (Video Control) Button –
a.
Push the Movie (video)
symbol (REC) appears and displayed with the elapsed time.
mode, first push the Select (center) control and then the Movie Control.
b.
Push the Movie Control
14.
Function –
Allows you to register 12 functions and recall those functions when shooting.
a.
Push the Function control
b.
Select the desired function by
c.
Select the setting value by turning the
15.
Menu -
Pushing this control activates the camera menu button
Multi-Selector buttons (16-20)
16.
Display / Up –
Pushing this control activates the camera
17.
Flash / Right –
Pushing this control activates the came
18.
Exposure Compensation / Photo Creativity / Down
exposure compensation / photo creativity / down
19.
Drive Mode / Self Timer / Left –
20.
Select / Rotary Wheel –
c.
Pushing this control activates the camera
d.
Rotating this control operates the camera rotary wheel, thereby enabling to alter exposure
values, navigate through menus and ot
21.
Latch Dial –
This dial ensures the housing is properly closed and watertight sealed, when locked fully
into place. For further instructions, please refer to the sections "Opening the Housing” and “Closing
FRX100 VA R Housing Instruction Manual
11
Turning this control counterclockwise will pop-up the camera built
Note that once the camera built-in flash has been popped up, it can be disabled again using the
and selecting “flash disabled” on the flash mode menu.
Up control clockwise will not have any effect on the built-in flash.
M (Manual), A (Aperture priority) or S (Shutter Speed
modes, please take into consideration that once the flash has been popped up
disabled. Therefore, in such cases, it's recommended to switch to Auto shooting mode to eliminate
the flash after it has been popped up.
–
(video) Control in any shooting mode to start recording a video. The record
) appears and displayed with the elapsed time. To record a video in HFR shooting
mode, first push the Select (center) control and then the Movie Control.
Control again in order to stop recording.
llows you to register 12 functions and recall those functions when shooting.
Function control.
Select the desired function by using multi-selector controls.
Select the setting value by turning the control ring or by using multi-selector controls.
Pushing this control activates the camera menu button.
Pushing this control activates the camera Display / Up button.
Pushing this control activates the camera flash mode / right button.
Exposure Compensation / Photo Creativity / Down –
Pushing this control activates the camera
exposure compensation / photo creativity / down button.
Left –
Pushing this control activates the camera drive mode / left button.
Pushing this control activates the camera Select (confirm selection) button.
Rotating this control operates the camera rotary wheel, thereby enabling to alter exposure
values, navigate through menus and other functions assigned to the rotary wheel.
This dial ensures the housing is properly closed and watertight sealed, when locked fully
into place. For further instructions, please refer to the sections "Opening the Housing” and “Closing
Instruction Manual 20200225
camera built-in flash.
in flash has been popped up, it can be disabled again using the
Flash
. Turning the Flash Pop-
priority) shooting
flash has been popped up – it cannot be
disabled. Therefore, in such cases, it's recommended to switch to Auto shooting mode to eliminate
g mode to start recording a video. The record
To record a video in HFR shooting
mode, first push the Select (center) control and then the Movie Control.
llows you to register 12 functions and recall those functions when shooting.
selector controls.
right button.
Pushing this control activates the camera
rive mode / left button.
(confirm selection) button.
Rotating this control operates the camera rotary wheel, thereby enabling to alter exposure
her functions assigned to the rotary wheel.
This dial ensures the housing is properly closed and watertight sealed, when locked fully
into place. For further instructions, please refer to the sections "Opening the Housing” and “Closing
