Fanimation Torrento FP920 Series, Owner'S Manual

Page: 8 / 14

8
Mounting Fan Base to Floor
FP920 – TORRENTO ®
Concrete Deck or Porch
NOTE: Minimum concrete thickness to be 5 inches thick.
1. Attaching fan to concrete will require power-hammer
drill and concrete drill bit. Pre-drill three pilot holes, 2¾ ˝
deep using ⅝ ˝ drill bit.
2. Attach base to surface using, supplied lag shields (3),
lag bolts (3) and flat washers (3).
NOTE: If you do not have adequate knowledge of
experience, have fan mounted by licensed electrician or
contractor.
Wood Deck
NOTE: Minimum decking thickness to be 2 inches thick.
Decking must be treated material intended for outdoor
use.
1. Make hole pattern using base assembly and pre-drill
pilot holes using ¼ ˝ drill bit.
2. Attach base to deck using supplied ⅜ ˝ lag bolts and flat
washers.
Concrete Surface; Pre-drill ⅝ ˝ pilot holes (3 places)
1 ft minimum
CAUTION
RISK OF ELECTRIC SHOCK: Keep Fan at least 16 feet
away from pools and spas.
NOTE: This Product Intended For Outdoor Use ONLY .
CAUTION
To reduce the risk of personal injury, the installation site
must allow the fan blades to rotate without obstruction.
2 ft min.
Overhead Deck
Staircase
Must have 7 foot
clearance
between blades
and other
obstacle (floor,
stairs,
decks, etc.)
CAUTION
To Reduce the Risk of Personal Injury, this Product Must
be Secured as Described Below.