Fancom LUMINA 16, Installation Manual

Page: 59 / 67

Lumina 16 Inputs and outputs
55
Analog inputs have the following settings:
Input address The address of the analog input.
Type Setting of the type of measurement being carried out:

NONE

TEMPERATURE

CO2 3000 PP

CO2 30000 PP

LINEAR (U)

LINEAR (R)

POLYNOMIAL (U)

LUX (R)
Measurement The measured signal (if changed manually, the correction value is adjusted
accordingly).
Correction Readout of the correction of the measurement (this value can only be reset).
Digital inputs have the following settings:
Input address The address of the analog input.
Type Setting of the type of measurement being carried out.

NONE

LEVEL

COUNT

FREQ

DSR feedback
Analog outputs have the following settings:
Output address
The address of the output.
Channel type Shows the type of analog output.
Channel function Setting of the type of analog control ( 0
– 10V
/ 10
– 0V
).
Correction factor Factor to determine the adjustment of the setpoint. This damps the effect of the control.
Repeat time The minimum time between two adjustments in the control by the computer control. This
setting means the control computer will not change the degree of control too quickly.