Lumina 16
Installer
49
The control computer can receive input from various sensors to determine the outside climate conditions. These
measurements can also be done by another control computer in the network.
INSTALLER
OUTS. CLIMATE
Measurement outside
temp.
Setting if the control computer carries out outside measurement concerned itself (
INT
)
or via the communication network (
COMM
). Only enter the address of the input if INT is
selected.
Address
Setting the address of the analog input.
Measurement outside
RH
Setting if the control computer carries out outside measurement concerned itself (
INT
)
or via the communication network (
COMM
). Only enter the address of the input if INT is
selected.
Address
Setting the address of the analog input.
Measurement wind
Setting if the control computer carries out outside measurement concerned itself (
INT
)
or via the communication network (
COMM
). Only enter the address of the input if INT is
selected.
Input wind speed
Setting of the address of the digital input.
Type wind measure
Setting of the type of anemometer used. Fancom uses the following types of weather
meters:
GREEN_2P
(default)
BLACK_4P
BLACK_2P
DAVIS
PA2
By choosing the required type and assigning the correct inputs, the control computer will
automatically make all corresponding settings.
Input wind vane
Setting the address of the analog input.
Wind direction
Readout of the current wind direction.
Wind relay address
Setting of the address of the digital input.
Summary of Contents for LUMINA 16
Page 1: ...g ...
