Lumina 41/42
House setup
8
This chapter explains all the options in the
HOUSE SETUP
menu.
In
HOUSE SETUP
select the parts of the control computer you intend to use. The control computer will only
display data relevant to you in the screens. Parts not used, will not be shown. Most codes are self explanatory.
In tab page
Number
the number of silos and the use of external alarms can be entered.
Installer
HOUSE SETUP
tab page
Number
Silos
Setting the number of silos that are in use.
External alarms
Setting indicating if one or more external alarms are connected to the Lumina 41/42
(Select
YES
). This allows a menu to be accessed where external alarms with their
own report message text can be set.
A few examples of external equipment with alarm options are door contacts, auger
motors or pressure alarm of a compressor.
In the tab page
Dose in
data about feed can be set.
Installer
HOUSE SETUP
tab page
Dose in
Price per ingredient is
per
Setting of the unit for entering the prices of feed ingredients. Prices can be entered
per KG, per 10 KG or per 100 KG.
Use EV setting
Setting to show the energy value in the user's menu. Select
YES
if the energy value
is to be shown on the screens in the user's menu.
Set feed curve to
Setting indicating if the data in the feed curves must be entered based on amount
(
AMOUNT
) or on energy value (
EV
).
Summary of Contents for F41
