38
DEUTSCH
ENGLISH
Type
Both filters can be switched off or independently used as Butterworth or Linkwitz.
Filter Order
If Butterworth is selected the order is selectable from 6 to 24dB in 6dB steps.
For Linkwitz 12dB and 24dB are available.
Fc
The corner frequency values ranges from 20Hz to 20kHz and can be adjusted with a precision of 1
Hz over the full frequency range.
The frequency modification starts always first with the leftmost digit and follows the leftmost
position automatically.
This allows a very fast adjustment over the full frequency range.
Each press of the Push Button moves the decimal place toward the first digit.
A cursor indicates the position of the decimal place.
Limiter Menu
The full range peak limiter is placed at the end of the systems signal path.
This prevents effectively unwanted clipping of the outputs of all Channels.
The impact of modifications of the limiter settings can be monitored by the bar graph, showed in
the 1st line of the display.
Limiter:
Use the Push Button to switch the limiter on and off.
Attack:
The attack time is adjustable from 1ms up to 250ms.
Settings resolution: 1-20 ms in 1ms, 20-100ms in 5ms, 100-250ms in 10ms steps.
Release:
The release time is adjustable from 5ms up to 3000ms.
Settings resolution: 5-100 in 5ms, 100-500 in 50ms, 500-3000ms in 100ms steps
Threshold:
The threshold has a total control of 42dB and ranges from -27 up to +15dB.
Settings resolution: 0 to +/-10dB in 0.5dB steps, outside in 1dB steps.
LowCut:
The use of a limiter for full range applications requires sometimes to keep the low frequencies away
from the peak detection circuit. LowCut indicates the corner frequency of an adjustable high pass
filter with 12dB/oct. It can be switched off or adjusted from 60 to 1000Hz. Settings resolution:
60-100Hz in 5Hz steps, 100-300Hz in 10Hz steps, 300-1000Hz in 25Hz steps.
Limiter (A:A+B)
Limiter: off
Thresh: 0.0dB
Attack: 5ms
Releas: 20ms
LowCut: off off
EXIT
