30
Rear Panel
1:
Power connection for IEC Cable
2:
Speakon Output
3:
Screw Terminals Output
4:
Line Output XLR
5:
Line Input XLR/Jack Combo-socket
6:
Mode Switch (Bridge, Stereo, Parallel)
7:
Sensitivity Switch
8:
HPF Switch (120Hz, 90Hz, Bypass)
9:
Resettable fuse.*
MS 5002 DSP
MS 8002 DSP / MS 12002 DSP
!
!
*The fuse is cut off if the power consumption of the output stage is too high. Once the problem is
resolved, the backup is automatically reset and the device is ready for operation again. The switch
can be used to force the reset.
Only use functional cables in perfect working order! make sure that the output stage power is
sufficient for your loudspeakers.
Operation:
Note: All connections of the device should be made before switching on. Use only
high-quality cables for the connections.
Start:
Connect the device to the mains and switch it on using the power switch on the front panel.
During power-on, the display shows a welcome message for a short moment.
If no preset is available, the system starts with the default settings, identical to the first power-on
and the factory setting in the Reset menu.
Important: Changes of the settings are not saved automatically! Modified settings can be saved in
the Presets menu. When leaving the menu without saving, the system asks for confirmation: ‚yes or
no‘.
DEUTSCH
ENGLISH
9
