33
DEUTSCH
ENGLISH
[1:1+2]
In order to achieve a minimum of effort during setting modifications, Input settings can be synchro-
nized by using the ‘Link’ function.
The upper case header line of the Input Setup menu and each submenu shows the status of Link
and Edit.
Above example indicates that Input 1 is selected for settings editing ‘Edit: [In1]’.
The Link function is set to Input 1 and Input 2 ‘Link: [1+2]’.
As result:
All setting modifications made on Input 1 are real time synchronized with Input 2.
Link:
Pressing the Push Button rotates the ‘Link’ between [1+2] and [---] (not linked).
If Inputs are linked, all subsequent settings will be applied to each Input.
Edit:
If Inputs are not linked [---], setting modifications are only effective at the selected Input [In1] or
[In2].
If Inputs are linked [1+2], the actual settings of the selected Input are displayed, but setting
modifications will take effect at each linked Input.
Be careful in the case that Inputs are linked, because the display shows settings of the
selected Input only, but the settings of the non-selected Inputs might be different. In such
case an empty arrow is displayed ( ), instead of ( ).
Copy
The settings of the current Input selection, eg. [In1] can be copied to Input 2.
The ‘Copy’ is initiated by a short press of the Push Button.
Next, select ‘[1-2]’ or ‘EXIT’ with the Rotary Function Dial.
Reset
The settings of the current Input selection, eg. [In1] can be reset to their default
values. The ‘Reset’ is initiated by a short press of the Push Button.
Next, select ‘yes’ or ‘EXIT’ with the Rotary Function Dial.
Input Delay Menü
The Input Delay is intended for long loudspeaker run time compensations.
4 selectable units allow precise and flexible adjustments of the distances in meter, feet, time and
number of samples @ 48kHz (1 sample = 20.83us or 7.146mm).
INPUT DLY (1:1+2)
Delay:
off
Meter: 1.00m
Samples: 140
Feet: 3.28ft
Time: 2.92ms
EXIT