35
DEUTSCH
ENGLISH
Quality Q for Bell
The values ranges from 0.5 to 20.
Settings resolution: 0.5 to 1.0 in 0.1, 1.0 to 10 in 0.5, 10 to 20 in 5.0 steps.
Channel Setup Menu
In the Channel Setup menu and its submenus all functions can be set and modified while the
system is running.
This enables the user the possibility to listen immediately to any changes until the utmost result is
achieved.
(A:A+B)
In order to achieve a minimum of effort during setting modifications, Channel settings can be
synchronized by using the ‘Link’ function.
The upper case header line of the Channel Setup menu and each submenu shows the status of
‘Link’ and ‘Edit’.
Above example indicates that Channel A is selected for settings editing ‘Edit: [ChA]’.
The Link function is set to Channel A and Channel B ‘Link: [A+B]’.
As result:
All setting modifications made on Channel A are real time synchronized with Ch. B.
Link:
Pressing the Push Button toggles the ‘Link’ between [A+B] and [---] (not linked).
If Channels are linked, all subsequent settings will be applied to each Channel.
Edit:
If Channels are not linked [---], setting modifications are only effective at the selected Channel
[ChA] or [ChB].
If Channels are linked [A+B], the actual settings of the selected Channel are displayed, but setting
modifications will take effect at each linked Channel.
Be careful when Channels are linked, because the display only shows settings of the
selected Channel, the settings of the non-selected Channel might be different. In such a
case, an empty arrow is displayed ( ), instead of ( ).
Channel C and D are only available on DSC2.4 and DSC4.4
CH SETUP (A:A+B)
Link:
(A+B)
Edit: (ChA)
Mute: off
EQ
XOVERLPF
XOVERHPF
Driver Delay
Limiter
Gain: 0.0dB
Phase
180:off
Copy (ChA)
Reset (ChA)
EXIT
Link:
(---)
(A+B)
(C+D)
(A-D)
Input:
1
2
3
4
Edit:
(ChA)
(ChB)
(ChC)
(ChD)
Mute:
off
on
Copy:
to (A-B)
to (C-D)
to (A-D)
Gain:
-15 dB
to
+15 dB
Reset:
yes
no
Phase 180:
off
on