31
DEUTSCH
ENGLISH
Menu:
The Root menu is accessible for everyone and gives information about the signals, loaded preset,
password, device ID & name (Network), model and the system info.
The Rotary Function Dial is used for cycling through the different screens.
Level-Screen
The Input level is indicated by a bar graph with a peak hold function. The resolution is from -70dB
up to +15dB within 28 steps. The peak hold is set to 1 sec.
Limiter
If the limiter is switched on, the left side of the display still shows the Input level, as described abo-
ve. The right side indicates the limiter reduction level, in case the signal exceeds the threshold level.
The peak hold function is switched off.
No Signal
Below -70dB the display shows the corresponding text. The left hand side character shows the
related Channel.
PRESET-Screen
After first power-on or when Factory default of the Reset menu was executed, the display shows
‘Default Settings’ below ‘PRESET’.
If the ‘Default Settings’ were modified but not stored, a ‘(modified)’ is displayed next to ‘PRESET’.
Note: If the ‘modified’ settings will be not stored to a preset, the ‘Default Settings’
will be loaded at next power-on. In such case the previous modifications are lost.
If a preset was loaded or stored, the preset number and preset name is displayed.
PASSWORT-Screen
The Password menu offers the option to set a password to avoid unauthorised tampering on stored
settings.
The display shows one of two possible messages as shown at right.
DEVICE ID & NAME
Shows the assigned ID number and name in a network.
Note: The ID number and name can only be assigned and changed by the RC1 PC remote
control software. Names can be up to 16 characters long.
MODELL Screen
Shows the DSC model number
SYSTEM INFO Screen
Shows the current system software version (Firmware).
From each position in the Root menu the Main menu can be called by short press the Push Button.
If a password protection is active the user must prompt the password to enter the Main menu.
