Falcon RJ-8000 User Manual Download Page 133

Page: 133 / 190

RJ-8000 OPERATION MANUAL

5 Maintenance

5-17

5.3 Cleaning

You need to clean the printer periodically to keep it in best working condition.

WARNING

•

Do not insert or drop metal or inflammable objects into openings, such as
ventilation outlets. Doing so may result in electrical shock and fire.

•

Stop using your printer if a liquid is spilled into it. This may cause electrical
shock or fire. Turn the printer off as soon as possible, unplug the power cord,
then contact MUTOH local dealer.

CAUTION

•

Be sure to turn off the printer and unplug the power cable from the outlet
before cleaning the printer.

•

Do not use thinner, Benzene, alcohol, or other active agents. Doing so may
result in damage or paint peeling from the casing.

•

Be careful not to spill water inside the printer. Doing so may result in a short
circuit.

•

Never open the covers fixed with screws. Doing so may result in electrical
shock or a malfunction in the printer.

The following are instructions for cleaning the printer.

5.3.1 Cleaning the outer case

(1) Cleaning frequency

Clean once a month.

(2) Cleaning procedure

Remove dust or smudges on the outer case with a soft cloth.

Summary of Contents for RJ-8000































































































































































































Search results

Summary of Contents for RJ-8000

Reviews:

Falcon RJ-8000, User Manual, Page: 133 / 190

Search results

Summary of Contents for RJ-8000

Reviews: