13
9. If flame is still not present, then re-check from start.
If flame is established but not maintained, follow this check list.
1. Check thermocouple is positioned correctly in burner flame.
(fig 12)
Burner ports must be clean.
2. Check thermocouple is not damaged and is secured to gas valve FFD section to allow FFD to
energise.
3. Check FFD is energising and maintaining flame.
4. If, after carrying out the above, burner is still not maintaining flame then re-check from start.
SECTION 4 - SPARES and
ACCESSORIES
When ordering spare parts, always quote appliance type and serial number.
This information will be found on data badge attached to base plate.
