manualshive.com logo in svg

FALCOM A2 Series, User Manual And Command Reference

Share
Download
FALCOM A2 Series User Manual And Command Reference Download Page 79

FALCOM A2

A2MAN.DOC

08 MARCH 1999

 This confidential document is the property of Funkanlagen Leipoldt OHG and may not be copied or circulated without permission.

Page 78

Please check the power and the cabling. Using the RSSI-Network button
you have the possibility to start a new initialisation routine.
All following services will be available only in the case the module is
registered in the network. It is to be seen by a green line  at the network
display. If the module could not register the following will be shown:

Please use a cellular phone or another GSM modem to check if a network is
available.

5.3.1

 

Voice-CALL and  SMS – CALL

In these windows a voice call or a short message could be issued. Preset
numbers (see ini file) will be used:

[SMS-CallNr]
"0123456789"

[VoiceCallNr]
"0123456789"

The used commands are to be seen at the terminal window where the
software switches automatically to.
The SMS-Call window gives the additional possibility to read out the
contents of the SIM card (AT+CMGL) and to delete messages
(AT+CMGD).
Integrated in the SMS-Call window there is a demonstration on how to build
and send PDU mode messages (7-bit and 8-bit coding schemes). After
hitting the “

Switch to PDU“

 button a window is opened for the input of the

PDU parameters 

(Picture 5). 

They are described using a Tool-Tip-Help.

The window for the coding scheme opens up by choosing the 7-Bit coding
option. An example demonstrates the coding step by step.

Summary of Contents for A2 Series


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands