FALCOM A2
A2MAN.DOC
08 MARCH 1999
This confidential document is the property of Funkanlagen Leipoldt OHG and may not be copied or circulated without permission.
Page 13
1.4.3
ATA
Command is used to accept an incoming call.
Command
Possible responses
ATA
OK If incoming call is a voice call
CONNECT <speed> If incoming call is a data call
ERROR
Defined values:
<speed>
see ATD command.
Remarks:
User should not use command, if ATS0 does not
equals zero.
Source:
GSM 07.07/V.25ter/6.3.5
Implementation:
yes
1.4.4
ATH
Command is used to end a call.
Command
Possible responses
ATH
NO CARRIER
ERROR
Remarks:
none
Source:
GSM 07.07/V.25ter/6.3.6
Implementation:
yes
1.4.5
AT+VGR
Command is used to set the amplification of the modules microphone.
Command
Possible responses
AT+VGR=<n> OK
AT+VGR?
+VGR: <n>
AT+VGR=?
(list of supported <n>s)
Defined values:
<n>
An integer <n>, range 0...255. Values larger than
128 indicate a larger gain than nominal. Values
less than 128 indicate a smaller gain than nominal..
Remarks:
none
Source:
GSM 07.07/C.4
Implementation:
not yet complete
