FALCOM A2
A2MAN.DOC
08 MARCH 1999
This confidential document is the property of Funkanlagen Leipoldt OHG and may not be copied or circulated without permission.
Page 24
1.8
Message handling commands
1.8.1
AT+CSCA
Command is used to set the service centre address. Mobile originated
messages are transmitted through these service centre.
Command
Possible responses
+CSCA=<sca>[,<tosca>]
OK
+CSCA?
+CSCA: <sca>,<tosca>
+CSCA=?
OK
Defined values:
<sca>:
GSM 04.11 RP service centre address Address-
Value field in string format
<tosca>:
GSM 04.11 RP service centre address Type-of-
Address octet in integer format
Remarks:
In PDU mode (at+cmgf=0) this command is
needed only when the length of the SMSC address
coded into <pdu> parameter equals zero.
Source:
GSM 07.05/3.3.1
Implementation:
yes
1.8.2
AT+CMGL
Command is used to read selected messages from the SIM card storage.
•
Text mode:
Command
Possible responses
+CMGL[=<stat>]
+CMGL: <index>,<stat>,<oa/da>
,””,[<scts>][,<tooa/toda>,<length>]<CR>
<LF><data>[<CR><LF>
+CMGL: <index>,<stat>,<da/oa>
,””,[<scts>][,<tooa/toda>,<length>]<CR>
<LF><data>[...]]
+CMS ERROR:
<err>
+CMGL=?
+CMGL: (list of supported <stat>
s
)
