FALCOM A2
A2MAN.DOC
08 MARCH 1999
This confidential document is the property of Funkanlagen Leipoldt OHG and may not be copied or circulated without permission.
Page 45
1.12.4
AT +CEER
Command is used to show the cause of a failure in the last call-setup or call-
modification.
+CMER
+CEER: <report>
+CMEE=?
OK
Defined values:
<report>:
cause as written below
Remarks:
none
Source:
GSM 07.07/6.10
Implementation:
yes
1.12.5
Cause information element values from GSM recommendation 04.08
Cause value
Diagnostic
1
Unassigned (unallocated) number
3
No route to destination
6
Channel unacceptable
8
Operator determined barring
16
Normal call clearing
17
User busy
18
No user responding
19
User alerting, no answer
21
Call rejected
22
Number changed
26
Non selected user clearing
27
Destination out of order
28
Invalid number format (incomplete number)
29
Facility rejected
30
Response to STATUS ENQUIRY
31
Normal, unspecified
34
No circuit/channel available
38
Network out of order
41
Temporary failure
42
Switching equipment congestion
43
Access information discarded
44
requested circuit/channel not available
47
Resources unavailable, unspecified
49
Quality of service unavailable
50
Requested facility not subscribed
55
Incoming calls barred with in the CUG
57
Bearer capability not authorized
