Fakir T10 series, User Manual, Page: 84 / 276

Working with measurement tools 17
Follow this procedure:
1. To set up an alarm for a difference calculation, do the following:
• If you are defining user presets, select ( Add measurement ). This displays a
submenu.
• If you are editing an image in the archive, select ( Measurement ). This displays
a submenu.
2. Select ( Select ). This displays a dialog box.
3. Select Delta . This displays a context menu.
4. Use the joystick to go to ( Set alarm on delta ).
5. Push the joystick. This displays a dialog box where you can define the settings for the
alarm.
• Alarm condition : The condition that triggers the alarm. Applicable values are Above ,
Below , or Off .
• Alarm limit : The temperature value that will be the critical condition when an alarm is
triggered or not.
• Alarm sound : Applicable values are Beep or No sound .
6. Push the joystick. This closes the dialog box.
#T559954; r. AL/37426/37426; en-US
70