Fakir T10 series, User Manual, Page: 100 / 276

Changing settings 25
◦ Screen rotation : This setting defines if the orientation of the overlay graphics will
change according to how you hold the camera.
◦ Image overlay information : This setting specifies what image information the camera
will display as an overlay on the image. For more information, see section 11.4 Im-
age overlay information , page 29. You can select to display the following information:
– Compass .
– Date & time .
– Emissivity .
– Reflected temperature .
– Distance .
– Relative humidity .
– Atmospheric temperature .
Note This setting only specifies what information to overlay on the image. All im-
age information is always saved to the image file and is available in the image
archive.
◦ Screen brightness : This setting defines the brightness of the screen. Available op-
tions are Low , Medium , High , and Auto .
◦ Viewfinder brightness : This setting defines the brightness of the viewfinder. Available
options are Low , Medium , and High .
◦ HDMI : (Applicable when an HDMI cable is connected to the camera.) This setting
defines the resolution of the digital video output. The setting can be used to select
display of the image only, or display of the image and the entire overlay graphics.
• Wireless & geolocation , Wireless , or Geolocation (depending on the camera configura-
tion): This submenu includes the following settings:
◦ Wi-Fi : This setting defines Wi-Fi networks. For more information, see section 24
Configuring Wi-Fi , page 82.
◦ Bluetooth : This setting defines Bluetooth connectivity. For more information, see
section 23 Pairing Bluetooth devices , page 81.
◦ GPS : This setting is used to enable/disable the GPS.
◦ Compass : This setting is used to enable/disable the compass and to calibrate the
compass. For more information, see section 13.15 Calibrating the compass , page
46.
• Lamp & laser : This submenu includes the following settings:
◦ Enable lamp & laser : This setting is used to enable the camera lamp and the laser
pointer.
◦ Enable lamp & laser + Use lamp as flash : This setting is used to activate the flash
function. When the flash function is activated, the camera lamp will flash when an im-
age is saved.
◦ Disable all : This setting is used to disable the camera lamp, laser pointer, and flash
function.
• Auto power off : This setting defines how soon the camera is automatically turned off.
Available choices are Off , 5 min , and 20 min .
• User interface options : This submenu includes the following settings:
◦ Manual adjustment mode : This setting specifies the type of manual image adjust-
ment mode. Available options are Level, Max, Min and Level, Span . For more infor-
mation, see section 15.3 Adjusting the infrared image , page 53.
◦ Emissivity mode : This setting specifies how the object parameter emissivity will be
entered. Available options are Select values and Select from materials table . For
more information, see section 17.5 Changing object parameters , page 64.
◦ Screening mode : This setting is used to enable/disable screening mode. For more
information, see section 22 Screening alarm , page 80.
#T559954; r. AL/37426/37426; en-US
86