Fakir T10 series, User Manual, Page: 60 / 276

Handling the camera 13
5. Push the rubber protection into position.
6. Deactivate the global parameter External IR window compensation by doing the
following:
6.1. Push the joystick to display the menu system.
6.2. Select ( Measurement parameters ) and push the joystick. This displays a
submenu.
6.3. Select ( External IR window compensation ) and push the joystick. This dis-
plays a dialog box.
6.4. In the dialog box, select Turn compensation on/off = Off .
6.5. Push the Back button to go back in the menu system.
13.15 Calibrating the compass
It is recommended that the compass is calibrated every time you move the camera to a
new location.
13.15.1 Procedure
Follow this procedure:
1. Push the joystick to display the menu system.
2. Use the joystick to go to ( Settings ).
3. Push the joystick to display the Settings menu.
4. Select Device settings and push the joystick.
5. Depending on the camera configuration, select Wireless & geolocation , Wireless , or
Geolocation and push the joystick.
6. Select Compass and push the joystick.
7. If the Compass check box is unchecked, push the joystick to enable the compass.
8. Select Calibrate compass and push the joystick. Follow the on-screen instructions.
Note You must rotate the camera slowly.
#T559954; r. AL/37426/37426; en-US
46