Fakir T10 series, User Manual, Page: 68 / 276

Achieving a good image 15
Select the type of manual image adjustment mode under ( Settings ) > Device settings
> User interface options > Manual adjustment mode .
When manual image adjustment mode is active, the status icon is displayed.
• In live mode, push the button to switch between automatic and manual image adjust-
ment modes. You can also switch between the modes by touching the temperature
scale on the screen.
• In preview/edit mode, manual image adjustment mode is active.
Note You can also assign the function Auto adjust the manual temperature scale to one
of the programmable buttons, which allows you to perform an automatic adjustment of the
image while remaining in manual image adjustment mode. Select ( Settings ) > Pro-
grammable buttons .
15.3.2 Example 1
Here are two infrared images of a building. In the left image, which is auto-adjusted, the
large temperature span between the clear sky and the heated building makes a correct
analysis difficult. You can analyze the building in more detail if you change the temperature
scale to values close to the temperature of the building.
Automatic Manual
15.3.3 Example 2
Here are two infrared images of an isolator in a power line. To make it easier to analyze
the temperature variations in the isolator, the temperature in the right image has been
changed to values close to the temperature of the isolator.
Automatic Manual
#T559954; r. AL/37426/37426; en-US
54