Fakir T10 series, User Manual, Page: 69 / 276

Achieving a good image 15
15.3.4 Manual adjustment in Level, Span mode
Note This procedure assumes that you have configured the camera for manual image
adjustments in Level, Span mode. Select Settings > Device settings > User interface op-
tions > Manual adjustment mode = Level, Span .
Follow this procedure:
1. In live mode, push the button to enter manual adjustment mode.
2. Move the joystick up/down to increase/decrease the level.
3. Move the joystick left/right to increase/decrease the span.
4. (Optional step.) In preview/edit mode, push the button to perform a one-shot auto-
adjust sequence.
15.3.5 Manual adjustment in Level, Max, Min mode
Note This procedure assumes that you have configured the camera for manual image
adjustments in Level, Max, Min mode. Select Settings > Device settings > User interface
options > Manual adjustment mode = Level, Max, Min .
Follow this procedure:
1. In live mode, push the button to enter manual adjustment mode.
2. To simultaneously change the temperature scale minimum and maximum limits, move
the joystick up/down.
3. To change the minimum limit or the maximum limit, do the following:
• Move the joystick left/right to select (highlight) the maximum or minimum
temperature.
• Move the joystick up/down to change the value of the highlighted temperature.
4. (Optional step.) In preview/edit mode, push the button to perform a one-shot auto-
adjust sequence.
15.4 Changing the temperature range
15.4.1 General
You must change the temperature range to suit the expected temperature of the object
you are inspecting.
15.4.2 Procedure
Follow this procedure:
1. Push the joystick to display the menu system.
2. Use the joystick to go to ( Settings ).
3. Push the joystick to display the Settings menu.
4. Select Camera temperature range and push the joystick.
#T559954; r. AL/37426/37426; en-US
55