Fahl Nebufirst, Instructions For Use Manual, Page: 30 / 108

30
EN
3.2 START-UP
•
The NEBUFIRST
®
INHALER is delivered ready for
operation.
•
Lift the device out of the packaging. Carry out a visual
inspection for external damage.
•
Check whether the voltage values indicated on the power
rating plate agree with the voltage supplied.
•
Always place the device on a level, secure surface.
•
You must observe the safety instructions in Section 2.0
before starting up the device for the first time.
•
Following transport at temperatures below freezing point,
the device must be left to stand at room temperature for up
to six hours before start-up. If the device is not acclimatised,
it must not be operated.
•
Only plug the NEBUFIRST
®
INHALER into a 230 V wall
socket.
•
Do not place the NEBUFIRST
®
INHALER on cloths or
blankets.
•
Ventilation slits should not be obstructed.
3.0 SET-UP AND START-UP
3.1 OPERATING ELEMENTS
➏ On/Off button
➐ Mains connection cable
➏
➐
Figure 3